Nortel Networks NN43001-321 - Manual (Page 94)

94 CS 1000 NRS operation
Figure 43
Configure telephony routes on MCS 5100
Configuring Meet Me Audio Conferencing in the NRS for CDS
To configure Meet Me Audio Conferencing for CDS, you must point the
meetme DID to the convergeddesktop gateway end point as a CDP entry.
Note: You must create the convergeddesktop endpoint before beginning
this procedure. For more information, see
"Gateway Endpoints" (page
89) .
Procedure 9
Configure Meet Me Audio Conferencing
Step Action
1 Log into the Network Routing Service Manager as admin.
2 Select Configuration > Routing Entries.
3 In the top toolbar, select the set Standby DB view radio button.
4 In the Routing Entries section, from the pulldown lists, select the
, the , and the .
5 In the Gateway Endpoint field, select convergeddesktop.
6 In the With DN Type field, select the DN Type and click Show.
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration Guide
NN43001-321 01.05 Standard
Release 5.0 15 February 2008
Copyright © 2005-2008, Nortel Networks
.