Nortel Networks NN43001-321 - Manual (Page 72)

72 Configuring MCS 5100
c. Select mydomain.com in the Domain drop-down list.
d. Click Save.
5 Add a trunk group directed to the gateway and route just created,
as follows:
a. Select Provisioning > Gateways > Add TrunkGroup in the
Provisioning Client navigator.
The Trunkgroup Provisioning web page opens, as shown in
Figure 24 "Provisioning Client: Trunkgroup Provisioning" (page
72)
.
Figure 24
Provisioning Client: Trunkgroup Provisioning
b. Select mydomain.com:maddr=12.123.1.123 from the Gateway
drop-down list.
c. Select myGWRoute from the Route drop-down list.
d. Enter myTrkGroup in the Trunk Group edit box.
e. Click Save.
—End—
Configure number qualifiers
Use Procedure 4 "Configuring number qualifiers" (page 74) to configure
number qualifiers in MCS 5100 so they match the values configured in the
CS 1000 NRS SIP URI phone-context Level 1 and Level 0 Domains, and
the CS 1000 SIP URI Map.
The following three sets of provisioned information must match:
• CS 1000 SIP URI Map (see Figure 25 "CS 1000 SIP URI Map" (page
73) ) as configured in Procedure 1 "Configuring SIP CDS on the
Signaling Server" (page 57) .
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration Guide
NN43001-321 01.05 Standard
Release 5.0 15 February 2008
Copyright © 2005-2008, Nortel Networks
.