Nortel Networks NN43001-321 - Manual (Page 78)

78 Configuring MCS 5100
• Gateway UDP route
• private PSTN route
• route for local Dial-9 National (NPA) dialing using the Gateway CS 1000
PSTN
• route for national Dial-9 National (NPA) dialing using the Gateway CS
1000 PSTN
Use Procedure 6 "Configuring routes for each dialing plan entry" (page
78) to configure these routes.
Procedure 6
Configuring routes for each dialing plan entry
Step Action
1 Enter the IP address of the MCS Provisioning Client in a web
browser.
The Provisioning Client Login web page opens, as shown in
Figure 20 "Provisioning Client Login" (page 70) .
2 Enter your Username and Password.
The Provisioning Client web page opens, as shown in Figure 21
"Provisioning Client" (page 70) .
3 Add the new routes, as follows:
a. Select Provisioning > Domains > mydomain.com > Telephony
Routes > Add Telephony Route in the Provisioning Client
navigator.
The Create New Telephony Route web page opens, as shown
in
Figure 31 "Provisioning Client: Create New Telephony Route"
(page 79) .
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration Guide
NN43001-321 01.05 Standard
Release 5.0 15 February 2008
Copyright © 2005-2008, Nortel Networks
.