Nortel Networks NN43001-321 - Manual (Page 68)

68 Configuring MCS 5100
Implementation summary
The following is a summary of the tasks in this section:
• "Add IP address of IP Telephony node as an Authenticated Server"
(page 68)
.
• "Configure the SIP Gateway, trunk, and trunk group" (page 69) .
• "Configure number qualifiers" (page 72) .
• "Configure a route list" (page 75) .
• "Configure routes for each dialing plan entry" (page 77) .
Implementation details
Add IP address of IP Telephony node as an Authenticated Server
Use Procedure 2 "Adding the IP Address of the IP Telephony node as an
Authenticated Server" (page 68) to add the IP address of the IP Telephony
node to the Application Server as an Authenticated Server.
Procedure 2
Adding the IP Address of the IP Telephony node as an Authenticated Server
Step Action
1 Access the MCS 5100 Management Console on the MCS Client:
a. Choose MCP from the Start menu.
b. Click Start console.
c. Log in using your username and password.
d. Select Sites.
e. Select Servers.
f. Select Application Server.
g. Select Components.
h. Select the application server.
2 Right-click on Authentication (or Authent...).
3 Select Modify.
4 Enter 12.123.1.123 , the IP address of the IP Telephony node, in
the Authorized Node IP Address field.
5 Click Add.
6 Click Apply.
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration Guide
NN43001-321 01.05 Standard
Release 5.0 15 February 2008
Copyright © 2005-2008, Nortel Networks
.