Nortel Networks NN43001-321 User Manual
Page 55
CS 1000 SIP configuration and UDP location dialing
55
Prompt
Response
Description
AC1 = NARS/BARS
AC2 = NARS
TYPE:
SPN
Special Number translation (Special code translation block)
Configure the CDS Service DN as an SPN, and point it
to the SIP trunk. This number is only internal between
the Call Server and the Signaling Server for reserving the
Virtual Trunk when routing the terminating CD call out to
the MCS 5100.
SPN
5100
Special Number.
The same DN must be used in the config.ini file in the
Service DN field on the Signaling Server.
- FLEN
xx
Flexible length number of digits
Flexible length is the exact number of digits the system
expects to receive before accessing a trunk and outpulsing
those digits.
-RLI
xxx
Route List Index for Converged Desktop Service Class of
Service (CLS)
The RLI number must point to the SIP Virtual Trunk on the
desired Signaling Server. For example, if the CDN and
SPN are configured on Signaling Server 1, then this RLI
must use the route configured on Signaling Server 1.
In the case where the customer has used all Special Numbers (SPN), a
CDP Distant Steering Code (DSC) can be used as a Service DN.
ATTENTION
Do this only if the Service DN has not already been configured as a Special
Number in LD 90 on
"LD 90 Configure Service DN for Converged Desktop." (page
LD 87 Configure Steering Code to be used as the Service DN for making Virtual Trunk call
from Agent.
Prompt
Response
Description
REQ:
NEW
Add new data block.
CUST
xx
Customer number as defined in LD 15.
(Customer number associated with this telephone.)
FEAT:
CDP
Coordinated Dialing Plan
TYPE
DSC
Distant Steering Code
DSC
x...x
Service DN
-FLEN
(0)-24
Flexible length number of digits
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration Guide
NN43001-321
01.05
Standard
Release 5.0
15 February 2008
Copyright © 2005-2008, Nortel Networks
.