Nortel Networks NN43001-321 - Manual (Page 67)

67
Configuring MCS 5100
Contents
This section contains information about the following topics:
"Before you begin" (page 67)
"Implementation summary" (page 68)
"Implementation details" (page 68)
"Add IP address of IP Telephony node as an Authenticated Server" (page 68)
"Configure the SIP Gateway, trunk, and trunk group" (page 69)
"Configure number qualifiers" (page 72)
"Configure a route list" (page 75)
"Configure routes for each dialing plan entry" (page 77)
"Configuring a Converged Desktop user" (page 81)
"Configure a Service Package" (page 81)
"Configuring the Converged User on the MCS 5100" (page 83)
Before you begin
ATTENTION
Some values in these instructions are taken from the example numbering plans
described in
"Description of the network configured in this document" (page
48) and "Examples of dialing and numbering plan configuration for mixed
networks" (page 37) . Note that actual values may differ between applications.
Before you begin configuring CDS on the MCS 5100, you must have a
Service Domain configured in MCS with the same name as in CS 1000. For
this example, the domain name is mydomain.com.
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration Guide
NN43001-321 01.05 Standard
Release 5.0 15 February 2008
Copyright © 2005-2008, Nortel Networks
.