Nortel Networks NN43001-321 User Manual

Page 84

Configuring MCS 5100

This is the HLOC + DN of the converged telephone. This number
is used for Click-to-Call in Converged Mode, and must be a UDP
number.

b. Enter 6139625573 in the Public Charge ID text box.

This is the NPA + NXX + DN of the converged telephone. It is the
caller identification information sent on a public call. This value is
required, and may be need even in Unconverged Mode.

c. Select cdCOS from the Class of Service drop-down list.

This is the same Class of Service configured in

Procedure 5

"Configuring a route list" (page 75)

Note: You do not have to configure an alias, but if you do,
ensure that it does not conflict with the alias properties
configured in

Step 3

d. Click Save.

Set up the converged properties, as follows:

a. Click Converged Desktop properties.

The Converged Desktop Data web page opens, as shown in

Figure 35 "Provisioning Client: Converged Desktop Data" (page
84)

Figure 35
Provisioning Client: Converged Desktop Data

b. Enter 000023345573 in the Converged Desktop Alias text box.

This is the PNI + HLOC + DN of the converged telephone.

c. Enter one of the following values in the Converged Desktop

Preferred Audio Device text box:

•

If you are configuring UDP, enter the Access Code (AC1 or
AC2) + HLOC + DN of the converged telephone.

Nortel Communication Server 1000

Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration Guide

NN43001-321

01.05

Standard

Release 5.0

15 February 2008