Nortel Networks NN43001-321 User Manual
Page 56
56
Configuring CS 1000
Prompt
Response
Description
Flexible length is the exact number of digits the system
expects to receive before accessing a trunk and outpulsing
those digits.
-DSP
aaa
Display, where aaa = LSC, LOC, DN.
-RRPA
(NO) YES
Remote Radio Paging Access
-RLI
xxx
Route List to be accessed for Distant Steering Code.
Virtual Route RLI with no DMI changes.
-CCBA
(NO) YES
Collect Call Blocking
-NPA
xxxxxxx
NPA code, maximum 7 digits
-NXX
xxxxxxx
NXX code, maximum 7 digits
LD 11 Configure Personal Call Assistant (PCA).
Prompt
Response
Description
REQ:
NEW
Add new data block to the system.
TYPE:
PCA
Personal Call Assistant
TN
Terminal Number
l s c u
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit
c u
Format for Small System, Media Gateway 1000B, and
Media Gateway 1000T where c = card and u = unit
CUST
xx
Customer number as defined in LD 15.
(Customer number associated with this telephone.)
TGAR
xx
Trunk Group Access Restriction
Make sure this value is non-blocking.
NCOS
(0)-99
Network Class of Service Group.
IMPORTANT: Ensure this value is high enough to allow
calls on SIP trunks.
CLS
UNR
Unrestricted Class of Service.
KEY
Telephone function key assignments
0 ACD 5308 cccc zzzz
Automatic Call Distribution (ACD) key
Where:
•
yyyy = ACD DN configured in LD 23 for Converged
Desktop use
•
cccc = CLID table entry of (0)-N, where N = the value
entered at the SIZE prompt in LD 15 minus 1
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration Guide
NN43001-321
01.05
Standard
Release 5.0
15 February 2008
Copyright © 2005-2008, Nortel Networks
.