Nortel Networks NN43001-321 User Manual
Page 50
50
Configuring CS 1000
2.
"LD 17 Configure the Application Module Link (AML)." (page 51)
.
3.
"LD 17 Configure Value Added Server (VAS)." (page 51)
4.
"LD 23 Configure Automatic Call Distribution (ACD) Directory Number
(DN)." (page 52)
5.
"LD 23 Configure Control Directory Number (CDN)." (page 52)
6.
"LD 86 Configure ESN Data Block with AC1 and AC2 (if not already
defined)." (page 52)
7.
"LD 90 Configure Home Location Code (HLOC)." (page 53)
.
8.
"LD 86 Configure Access Code (AC1 or AC2)." (page 53)
.
9.
"LD 86 Configure Digit Manipulation." (page 54)
.
10.
"LD 86 Configure Home Location Code." (page 54)
.
11. One of the following:
•
"LD 90 Configure Service DN for Converged Desktop." (page 54)
•
.
In the case where the customer has used all Special Numbers (SPN),
a CDP Distance Steering Code (DSC) can be used as a Service DN.
12.
"LD 11 Configure Personal Call Assistant (PCA)." (page 56)
.
LD 15 Configure CLID and HLOC.
Prompt
Response
Description
REQ
CHG
Change existing data block.
CUST
Customer number
0-99
Range for Large Systems and CS 1000E system
0-31
Range for Small Systems and Media Gateway 1000B
TYPE
NET
Networking
AC2
LOC
Access Code 2
ISDN
YES
Integrated Services Digital Network allowed.
-PNI
2
Private Network Identifier
PNI cannot be zero (0).
-HLOC
334
Home Location Code (ESN) (1-7 digits)
This must be the same HLOC as configured under CLID.
-CLID
Yes
Allow Calling Line Identification option.
--ENTRY
0
CLID entry to be configured (Table 0 for CLID)
---HLOC
334
Home Location Code (ESN)
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration Guide
NN43001-321
01.05
Standard
Release 5.0
15 February 2008
Copyright © 2005-2008, Nortel Networks
.