beautypg.com

Figure 15 sip cd services, Figure – Nortel Networks NN43001-321 User Manual

Page 59

background image

CS 1000 SIP configuration and UDP location dialing

59

Figure 15
SIP CD Services

5

Enter the necessary information in the following fields:

a. Service Enabled: Select whether the Converged Desktop

Service application is enabled or disabled for this node. CDS is
enabled by default (the check box is selected).

Note: If CDS is not enabled, no calls are sent to the MCS
5100, including both originating and terminating calls either
to or from the Converged Desktop telephone.

b. Service DN used for making VTRK call from Agent: Enter the

Service DN. The Service DN is a number for CS 1000 to call the
Signaling Server CDS application over a SIP Virtual Trunk. This
number can be composed of:

LOC + extension

Extension

SPN

As described in

"How Converged Desktop Services works"

(page 14)

, upon receipt of an incoming call notification over

the AML/VAS links, the CDS application must reserve a Virtual
Trunk until the destination of the call is determined. The CDS
application instructs the Call Server to make a call to this Service
DN. The Call Server’s numbering plan directs the call to the

Nortel Communication Server 1000

Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration Guide

NN43001-321

01.05

Standard

Release 5.0

15 February 2008

Copyright © 2005-2008, Nortel Networks

.