beautypg.com

Nortel Networks NN43001-321 User Manual

Page 49

background image

49

Configuring CS 1000

Contents

This section contains information about the following topics:

"Before you begin" (page 49)

"CS 1000 SIP configuration and UDP location dialing" (page 49)

"Configuring the Call Server" (page 49)

"Configure the Signaling Server usingCS 1000 Element Manager" (page 57)

"Verifying configuration" (page 64)

"Configuring the Converged Desktop User" (page 66)

Before you begin

ATTENTION

Some values in these instructions are taken from the values in

"Description of the

network configured in this document" (page 48)

, and from example numbering

plans described in

"Examples of dialing and numbering plan configuration

for mixed networks" (page 37)

. Note that actual values may differ between

applications.

Before you begin configuring CDS on the CS 1000, you must have a
SIP Trunk Gateway configured. The SIP Trunk must have Insert ESN
Access Code (INAC) configured for incoming LOC calls. Refer to IP Peer
Networking Installation and Commissioning (NN43001-313)
for details.

Ensure that CDS calls are routed over the SIP Trunk Gateway that is
associated with the CDS application.

CS 1000 SIP configuration and UDP location dialing

Configuring the Call Server

The following is a summary of the tasks in this section:

1.

"LD 15 Configure CLID and HLOC." (page 50)

.

Nortel Communication Server 1000

Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration Guide

NN43001-321

01.05

Standard

Release 5.0

15 February 2008

Copyright © 2005-2008, Nortel Networks

.