Nortel Networks NN43001-321 User Manual
Page 47
47
CDS configuration: overview
Contents
This section contains information about the following topics:
"Configuration notes" (page 47)
"Description of the network configured in this document" (page 48)
Introduction
In order to use SIP Converged Desktop Services, the SIP Trunk Gateway
must first be configured. See IP Peer Networking Installation and
Commissioning (NN43001-313) for detailed instructions.
Configuration of SIP CDS on CS 1000 requires configuration on both the
Call Server and the Signaling Server. See
for detailed instructions on configuring these elements.
SIP CDS must also be configured on MCS 5100. Refer to
for detailed instructions.
Configuration notes
You must configure UDP/Home Location (HLOC) codes using an Access
Code (either AC 1 or AC2) and the ESN Data Block with Local Termination
Feature (LTER). You must also configure a Route List Block entry (RLI) to
delete the HLOC when the CS 1000 recognizes a user has dialed within
its own customer (Home Location) or when a converged MCS 5100 user is
dialing within the CS 1000 Home Location. This feature is needed for the
MCS 5100 PC Clients in a Click-to-Call call from a Friends list or call log.
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration Guide
NN43001-321
01.05
Standard
Release 5.0
15 February 2008
Copyright © 2005-2008, Nortel Networks
.