Peavey X-Eight HS - Manual (Page 127)

p. 127
microprocessor muting system
features
mute controller
E— SINGLE SCENE
There are nine MUTE sources available from the MUTE CONTROLLER :the eight
MANUAL MUTE SCENES H, and the MICRO SCENE G. Normally any or all of
these nine sources can be active at-one-time, which allows the operator
to combine different mute patterns. The
SINGLE SCENE switch, when
depressed, permits only one of the nine-sources to be active at-one-time.
F— MICRO UTILITY
This latching switch will put the system into UTILITY mode.The operator
can then access and view the various parameters and functions of the con-
troller using the
UP / DOWN buttons A and the DISPLAY B.
G— MICRO SCENE This switch activates the SEQUENCED SCENE ( PATCH ).
The DISPLAY B shows which of the 128 possible SCENES are active.
H— MANUAL MUTES These eight switches activate the associated MANU -
AL MUTE SCENE .Additionally, these switches, along with G, select which MUTE
SCENE is being edited when in EDIT / PREVIEW mode.
I— RECALL ( NEXT ) Each press of this switch increments the SEQUENCED
MUTES by one, the DISPLAY B will reflect this.Also used to activate the dis-
played scene when an UP / DOWN A button was used to scroll to a new
scene. In this case, an * will be displayed as the first-character in the display
to indicate that the displayed number is not currently the active scene.
Pressing
RECALL will put that displayed SCENE into place and clear the *
from the display.
All of these actions
will take place, but
the displayed
SEQUENCED
SCENE will not be active
(mutes not enabled)
—unless the
MICRO SCENE
switch G is lit.
+
7