Lexmark 9500 Series - Manual (Page 73)

Paper capacities for Tray 1
Load up to Make sure
150 sheets of plain paper • The paper is designed for use with inkjet printers.
• The paper guides rest against the left, right, and bottom edges of
the paper.
25 sheets of heavyweight matte paper
25 sheets of photo paper
25 sheets of glossy paper
• The glossy or printable side of the paper faces down. (If you are not
sure which side is the printable side, see the instructions that came
with the paper.)
• The paper guides rest against the left, right, and bottom edges of
the paper.
Note: Photos require more drying time. To prevent smudging or
scratching, avoid touching the printed surface with your fingers or sharp
objects. For best results, remove each printed sheet individually from
the paper exit tray, and allow the prints to dry at least 24 hours before
stacking, displaying, or storing.
25 sheets of letterhead paper • The letterhead side of the paper faces down.
• The top of the letterhead feeds into the printer first.
• The paper guides rest against the left, right, and bottom edges of
the paper.
Loading paper and original documents
73