Lexmark 9500 Series - Manual (Page 224)

7 Press or until On appears.
8 Press .
M
AKE SURE YOU TYPE IN THE CORRECT PASS KEY
If you set Security to High, you must type in the pass key from another Bluetooth-enabled device. Consider
setting Security to Low to eliminate the need for a pass key:
1 From the control panel, press or repeatedly until Setup is highlighted.
2 Press .
3 Press or repeatedly until Change Bluetooth Default Settings is highlighted.
4 Press .
The Bluetooth Default Settings menu appears.
5 Press or repeatedly until the option for Security is highlighted.
6 Press or repeatedly until Low appears.
7 Press .
M
AKE SURE THAT THE EXTERNAL
B
LUETOOTH
-
ENABLED DEVICE IS CONFIGURED TO
COMMUNICATE WITH THE
B
LUETOOTH ADAPTER CONNECTED TO YOUR PRINTER
For more information, see the documentation that came with the external Bluetooth-enabled device.
Jams and misfeeds troubleshooting
How to clear and avoid paper jams
To clear the paper path:
1 Pull firmly on the paper to remove it. If you cannot reach the paper because it is too far into the printer, lift the
scanner unit to open the printer.
2 Pull the paper out.
3 Close the scanner unit.
4 Press .
5 Reprint any missing pages.
To avoid paper jams, do not force paper into the printer.
Troubleshooting
224