Poor quality at the edges of the page – Lexmark 9500 Series User Manual
Page 205
•
Envelopes
•
Iron-on transfers
Note: Transparencies may take up to 15 minutes to dry.
U
SE
A
DIFFERENT
BRAND
OF
PAPER
Each paper brand accepts ink differently and prints with color variations. If you are printing photos or other
high-quality images, for best results use Lexmark PerfectFinish Photo Paper or Lexmark Photo Paper.
C
HECK
PAPER
CONDITION
Use only new, unwrinkled paper.
R
EMOVING
AND
REINSTALLING
THE
SOFTWARE
Software may not be installed correctly. For more information, see “Removing and reinstalling the software” on
page 191.
Poor quality at the edges of the page
These are possible solutions. Try one or more of the following:
C
HECK
MINIMUM
SETTINGS
Unless you are using the borderless feature, use these minimum print margin settings:
•
Left and right margins:
–
6.35 mm (0.25 in.) for letter-size paper
–
3.37 mm (0.133 in.) for all paper sizes except letter
•
Top margin: 1.7 mm (0.067 in.)
•
Bottom margin: 12.7 mm (0.5 in.)
S
ELECT
THE
B
ORDERLESS
FEATURE
1
With a document open, click File Print.
2
Click Properties, Preferences, Options, or Setup.
3
Click the Advanced tab.
4
In the Layout section, select Borderless from the drop-down list.
5
Select the borderless paper size.
Note: The borderless paper size must be the same on both the Print Setup tab (Paper Options area) and the
Advanced tab (Layout area).
S
ELECT
THE
B
ORDERLESS
RESIZE
FEATURE
(
WHEN
COPYING
)
1
From the control panel, press
or
repeatedly until Copy is highlighted.
2
Press .
Troubleshooting
205