Lexmark 9500 Series User Manual
Page 65
Switching from a wired (Ethernet) connection to a wireless connection
1
Press
to turn off the printer.
2
Remove the Ethernet cable from the printer.
3
Press
to turn on the printer.
4
Run the wireless setup application. For more information, see “Run the Wireless Configuration Utility” on
page 202.
5
Print a test page to test the communication between the computer and the printer. For more information, see
“Printing a test page” on page 217.
Switching between a USB connection and a wireless network
connection
Switching from a USB connection to a wireless connection
1
Run the wireless setup application. For more information, see “Run the Wireless Configuration Utility” on
page 202.
2
Print a test page to test the communication between the computer and the printer. For more information, see
“Printing a test page” on page 217.
Switching from a wireless connection to a USB connection
1
Insert one end of the USB cable into the USB port of the printer.
2
Insert the other end of the USB cable into the USB port on the computer.
3
On your computer, do one of the following:
In Windows Vista:
a
Click
Control Panel.
b
Under Hardware and Sound, click Printer.
In Windows XP:
•
Click Start Printers & Faxes.
Note: Make sure that the printer driver is installed in the computer you are using. For more information, see
“Installing the printer on additional network computers” on page 57.
4
Right-click the Lexmark 9500 Series icon.
5
Click Properties.
6
From the Ports tab, select the USB port for your printer.
7
Click Apply.
8
Click OK.
9
Print a test page to test the communication between the computer and the printer. For more information, see
“Printing a test page” on page 217.
Connecting the printer to a network
65