Kodak DCS300 - Manual (Page 33)

1-21
1
Y
our
C
a
me
ra
Setting the Lens to the Minimum Aperture
For all Exposure modes with lenses other than the IX-Nikkor, set the lens to its minimum
aperture. (The minimum aperture will vary, depending on the lens.)
1 Set the lens to its minimum
aperture.
2 Slide the lock lever in the
direction of the aperture ring so
that the white dot on the tab
aligns with the orange dot.
Slide the lock lever in the
opposite direction to release the
lock.
Aperture setting operations are
performed using the Sub-
Command dial. Do not move the
aperture ring on the lens once it
is set to its minimum aperture.
When the lens is not set to its
minimum aperture and the
camera is turned On, FEE
blinks in the Camera Status
LCD panel and inside the
viewfinder. The shutter locks.