Flash sync terminal, Flash sync terminal -26 – Kodak DCS300 User Manual
Page 178
8-26
Flash Sync Terminal
The Flash Sync terminal is only available with the DCS 330 camera.
The DCS 330 camera has an external Flash Sync terminal located on the camera’s left
side. This terminal may also be referred to as a PC Sync jack or X-Terminal and it is
compatible with the industry standard sync cords. It is used for triggering strobe units that
are not mounted onto the camera’s hot shoe, and it is rated for sync voltages up to a
maximum of 30V DC.
Do not use the Flash Sync terminal and the camera’s hot shoe simultaneously.
☛
The Flash sync cord/connector set is not supplied with the camera.
WARNINGS:
The Flash Sync terminal is for a flash sync cable system ONLY! DO NOT CONNECT
AC MAIN POWER TO THIS CONNECTOR! Doing so can create a hazardous
condition.
Flashes with a trigger circuit voltage greater than 30V DC will damage your camera
and can be hazardous.
- LS753 (73 pages)
- LS753 (64 pages)
- DX7590 (82 pages)
- CX7220 (72 pages)
- CX7220 (60 pages)
- C533 EN (67 pages)
- CX7330 (61 pages)
- LS443 (122 pages)
- Z760 (91 pages)
- Z760 (79 pages)
- DX3900 (105 pages)
- Z700 (78 pages)
- CD40 (79 pages)
- Z7590 (118 pages)
- Z7590 (104 pages)
- Z612 (101 pages)
- Z612 (90 pages)
- DC3400 (156 pages)
- CX4200 (106 pages)
- Z650 (94 pages)
- Z650 (77 pages)
- DX7440 (67 pages)
- LS755 (83 pages)
- LS755 (80 pages)
- V610 (87 pages)
- V610 (106 pages)
- Z740 (70 pages)
- CX7530 (83 pages)
- CX7530 (66 pages)
- CX7530 (67 pages)
- CX7525 (66 pages)
- CX7525 (83 pages)
- V530 (95 pages)
- V530 (73 pages)
- C643 (83 pages)
- EASYSHARE C603 (72 pages)
- C340 (74 pages)
- EasyShare C340 (74 pages)
- C340 (83 pages)
- V603 (91 pages)
- V603 (76 pages)
- DX3500 (92 pages)
- C663 (85 pages)
- EasyShare C663 (74 pages)
- Z730 (97 pages)