Kodak DCS300 - Manual (Page 225)

B-3
A
p
p
end
ix
B
The shutter
doesn’t work
in Single Servo
AF mode. (It
can be released
in Continuous
Servo AF
mode).
blinks in the
viewfinder
Autofocus is
impossible with the
subject. Set the Focus Mode
selector to M and focus
manually using the clear
matte field. Refer to
“Using Manual Focus” on
page 7-18.
stays in the
viewfinder in AF
mode.
The subject is
located closer than
the closest focusing
distance of the lens. Move away from the
subject and refocus.
blinks in the
Camera Status LCD
panel.
Built-in flash is
being used in
Continuous Shooting
Drive mode. Drive
mode automatically
changes to Single-
Frame shooting. Capture one image at a
time.
blinks in the
Camera Status LCD
panel.
Red-Eye Reduction
set with a Speedlight
lacking Red-Eye
Reduction. Camera
automatically
switches Flash Sync
mode to Normal
Sync.
The shutter
does not
release. The Flash Ready
light is Off when the
Built-in flash is up. Built-in flash is not
charged. Wait for the flash to charge.
If the delay is too long,
replace the batteries or use
an AC adapter.
Nothing
appears in the
LCD panels. The camera is turned
Off or there is no
power source. Turn the camera On or
insert new batteries (or
connect to the Kodak-
specified AC adapter).
HI appears in Auto
exposure mode.
Overexposure
possible.
Lo appears in Auto
exposure mode.
Underexposure
possible.
Symptom Indication Cause Remedy