Kodak DCS300 - Manual (Page 206)

11-8
If you chose Cancel, you can
turn the camera Off and replace
the lens.
If you chose OK, the mirror lifts
and the shutter opens.
The imager is visible through
the lens mounting flange.
The Close Shutter screen
appears in the Image LCD
panel.
14 Hold the camera so that light
reflects off the imager. Visually
inspect the imager for grease,
fingerprints, lint, or other dirt.
If the imager is dirty, you can
clean and reassemble the
camera. If it is clean, you can
reassemble the camera without
cleaning. Both procedures are
described on the next page.
CAUTION:
Do not remove the power
sources while the mirror is
raised.