Kodak DCS300 - Manual (Page 115)

6-25
6
Ge
ne
ra
l
3 Rotate the Sub-Command dial to
set the desired aperture.
Refer to the “Operating in
Aperture-Priority Auto
Exposure Mode” section on
page 6-21 for aperture
indications and sequence.
4 Look inside the viewfinder,
compose the shot, and lightly
press the Shutter Release button.
Adjust the shutter speed and/or
aperture by rotating the Main- or
Sub-Command dials until the
electronic analog display shows
“0” or your desired value. Be
sure to confirm focus.
5 Fully depress the Shutter
Release button to capture an
image.
AF-S
S
+2.1.0.1.2- F
PRINT
TYPE
F
ISO
A
C
F +2.1.0.1.2-