Kodak DCS300 - Manual (Page 142)

7-10
2 Press and hold the SET button
and rotate the Main-Command
dial until the desired
compensation degree (0.5 or
1.0) appears.
3 Remove your finger from the
SET button to complete the
setting.
0.0 starts blinking in the Camera
Status LCD panel to indicate no
compensation, and the
Electronic Analog display starts
blinking inside the viewfinder.
To cancel Auto Exposure
Bracketing before starting or
during bracketing, turn the
camera power Off then On
again, or press and hold the Ps
and RESET buttons for more
than two seconds (Two-Button
Reset).
SET
FNC
( )
MDE
Ps
BUSY
RESET +/-
AE
TYPE
PRINT
F
BKT
AF-S
S ISO
TYPE
F +2.1.0.1.2-
AE
PRINT
F
A
BKT
C