Kodak DCS300 - Manual (Page 140)

7-8
Once set, Exposure
Compensation remains fixed
until reset. The
symbol
remains in the Camera Status
LCD panel (indicating that
Exposure Compensation is On),
until you remove your finger
from the Exposure
Compensation button.
The symbol disappears from
the viewfinder when the
exposure meter automatically
turns Off.
2 After shooting, reset the
compensation value to “0” to
resume normal operation.
You can cancel Exposure
Compensation by pressing and
holding the Ps and RESET
buttons for more than two
seconds (Two-Button Reset).
To confirm the compensation
value on the Camera Status LCD
panel, press the Exposure
Compensation button.
AF-S
S
F
TYPE
PRINT
ISO
C
A
+/-
+/-
TYPE
PRINT
F
F
F
PRINT
TYPE