Kodak DCS300 - Manual (Page 227)

B-5
A
p
p
end
ix
B
The camera
doesn’t work.
Controls don’t work
and the LCD panels
don’t display. No power to camera. Verify battery placement
and capacity or check the
Kodak-specified AC
adapter. Refer to
“Batteries” on page 2-3 or
“Connecting the Kodak-
specified AC adapter” on
page 2-9.
The camera controls
don’t work. The camera is
“locked up.” Remove batteries and AC
adapter and contact your
service representative.
The Image
LCD panel is
not clearly
visible. The Image LCD
panel is too light or
too dark. The Display Contrast
is set incorrectly. Adjust the Display
Contrast. Refer to
“Adjusting the Display
Contrast” on page 9-4.
The image
quality is not
satisfactory. A variety of
unsuitable images. Improper use of SLR
camera functions. Refer to chapters 6, 7, or 8
or consult your camera
dealer.
The images are
magenta. Magenta cast to
images. A hot mirror is not
being used. Use the hot mirror.
Symptom Indication Cause Remedy