Kodak DCS300 - Manual (Page 205)

11-7
11
Ca
mer
a
Ca
re
7 Press the MENU button to turn
the Image LCD panel On.
8 Press and hold the MENU
button and rotate the Main-
Command Dial to highlight the
Main Menu icon.
9 Release the MENU button.
The Main menu appears.
10 Press and hold the SELECT
button and rotate the Main-
Command dial to highlight the
Imager Clean choice.
11 Release the SELECT button.
If there are no batteries in the
camera or the camera is not
connected to an AC adapter, a
message to that effect will
appear. Return to Step 3.
If the batteries and AC adapter
are in place, the Open shutter
screen appears in the Image
LCD panel.
12 Press and hold the SELECT
button and rotate the Main-
Command dial to highlight OK
to proceed, or highlight Cancel
to cancel the process.
13 Release the SELECT button