Configuring the dhcp server – Siemens SE505 User Manual

Page 76

Configuration with Advanced Setup

Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003

Configuring the DHCP server

The router has a

, whose factory setting is active. As a result, the IP

addresses of the PC's are automatically assigned by the router. If you want to assign

static IP addresses for the PCs, you will have to deactivate the DHCP server.

◆

In the LAN menu, select DHCP Server.

◆

Select DHCP Server.

◆

If the router's DHCP server is active, configure the network settings of

your PC's so that the Obtain an IP address automatically option is

checked. To find out how to do this, please turn to the chapter entitled

◆

If you deactivate the router's DHCP server, you will have to assign a

static IP address for the PC's using the network settings. This is

described in "Practical Tips and Configuration Examples" on the CD

supplied.