Installing the tcp/ip protocol – Siemens SE505 User Manual

Page 22

Configuring the local network

Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003

Installing the TCP/IP protocol.

The

protocol ensures that the PC's in the network can communicate with each

other. You must first install this

for the network adapter that establishes the

connection to the Gigaset SE505 dsl/cable.

◆

In the Network window move from the Identification tab to the Configuration tab.

◆

In the Network window, check that there is a TCP/IP -> entry for your network card

or network adapter in the list of components. If you are using a Gigaset PCI Card 54

as the wireless network adapter for example, then there must be an entry called

TCP/IP -> Siemens Gigaset PCI Card 54.

◆

If the entry does not exist, click on Add.

◆

Select Protocol as the network component type and click on Add.

◆

In Manufacturers select Microsoft and in Network Protocols select TCP/IP before

confirming with OK.