Siemens SE505 - Manual (Page 37)

36
Configuring the local network
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003
Network configuration with Windows 2000
To integrate a PC with Windows 2000 into a network that is configured with a Gigaset
SE505 dsl/cable:
1. Install the network services (see below).
2. Select computer names and workgroup (see page 37).
3. Install the TCP/IP protocol (see page 38).
4. Make TCP/IP protocol settings (see page 40).
5. Deactivate the http proxy (see page 42).
6. Synchronise the TCP/IP settings to the Gigaset SE505 dsl/cable (see page 43).
Installing network services
You have to install the network services before the PCs in your network can access
shared resources. This is done as follows:
1. Click on Start – Settings – Control Panel.
◆ Double click on the Network and dial-up connections icon.
◆ In the left-hand pane click on Add Network Components.