Lan configuration, Defining the router's private ip address, Configuration – Siemens SE505 User Manual

Page 74

Configuration with Advanced Setup

Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003

LAN Configuration

You can use LAN configuration to

◆

define an IP address for the router (see below),

◆

enable or disable the router's UPnP functionality (see page 77) and

◆

configure the router's DHCP server (see page 78).

Defining the router's private IP address

You can change the router's

in this screen. The default IP address for the

router is 192.186.1.1. This is the router's

. This is the address under

which the router can be reached on the local network. It can be freely assigned from the

block of available addresses. The IP address under which the router can be reached from

outside is assigned by the Internet Service Provider.

◆

In the LAN menu, select Private IP address.

◆

If you want to assign the router a different IP address, enter it in IP Address.

◆

The

is 255.255.255.0 by default. We advise that you do not change

this setting.

◆

Click on APPLY to apply the settings.

We recommend using an address from a block that is reserved for

private use. This address block is 192.168.2.1 - 192.168.255.254.