Siemens SE505 - Manual (Page 52)

51
The user interface
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003
As soon as you have changed the configuration in a screen, you can activate the new
setting by clicking on APPLY or NEXT at the bottom of the screen.
Buttons
Other buttons may be visible depending on the function in question. These are
described in the relevant sections.
i
Please read the following information if you are using Internet
Explorer 5.0.
Once you have entered the command, the screen will be properly
updated if you have configured Internet Explorer as follows:
In Extras – Internet Options – General – Temporary Internet Files –
Settings the setting for Check Newer Versions should be set to Every
Visit.
Basic Setup
and
Security
Setup:
NEXT Opens the screen for the next configuration step.
BACK Returns to the previous configuration step.
CANCEL Clears all the entries on a screen since the last time it was
opened.
FINISH Transfers the settings you have made to the router
configuration.
HELP Displays help information about the current screen.
Advanced
Setup:
APPLY Transfers the settings you have made to the router
configuration.
CANCEL Deletes all the entries in a screen since the last time APPLY
was run.
HELP Displays help information about the current screen.