Siemens SE505 - Manual (Page 20)

19
Configuring the local network
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003
Network configuration for Windows 98, 98 SE, ME
To integrate a PC with Windows 98, 98 SE or ME in a local network, you must carry out
the following steps:
1. Set up the PC as the Client for Microsoft Networks (see below).
2. Select computer names and workgroup (see page 20).
3. Install the TCP/IP protocol (see page 21).
4. Make TCP/IP protocol settings (see page 22).
5. Deactivate the http proxy (see page 26).
6. Synchronise the TCP/IP settings to the Gigaset SE505 dsl/cable (see page 27).
Setting up a PC as a Client for Microsoft Networks
Before the PC's on your network can work together, you have to configure them as
Microsoft Network Clients . This is done as follows:
◆ Click on Start – Settings – Control Panel.
◆ Double click on the Network icon and open the Configuration tab in the Network
window.
◆ Check whether the list of components contains the entry Client for Microsoft
Networks.
◆ If it is not there click on Add.
◆ Select Client as the network component type and click on Add.