Allowing selected pc's access your local network – Siemens SE505 User Manual
Page 67
66
Configuring security measures
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003
Allowing selected PC's access your local network
In this next step you can specify up to 32 PC's that are allowed to access your LAN. All
other computers will be denied access. Access control is based on the
the specified PC's.
The access control is disabled by default. This means that all PC's that use the correct
SSID can log in. If you wish to keep this setting, click on NEXT.
If you wish to use the access control, select MAC access control list. The access control
list that was last defined is displayed and enabled. Now only these PC's can log in to your
router.
◆
To go to the next step in the Security Setup, click on NEXT.
!
When you activate the MAC access control you should at least enter the
PC from which you configure the router, otherwise you will no longer be
able to access the router's user interface and will see an error message to
this effect.
If you have denied all your PC's access to the router by mistake, you have
two options:
◆
You can completely reset the router (see page 108).
◆
You can connect one PC to the router by one of the LAN connections.
Because the MAC access control only applies to PC's that are connec-
ted 'wirelessly', you can use this PC to change the router's configura-
tion.
i
You will find a detailed example of how to generate a MAC access
control list in "Practical Tips and Configuration Examples" on the supplied
CD.