Sun Microsystems 4500/3 User Manual
Page 71
Appendix B
Console Output for the Automatic Software Install on the Cluster Nodes
59
============================================================
PLEASE WAIT: Setting up system for root and swap mirroring.
System will reboot after setup!
============================================================
hsp001: Hotspare pool is setup
hsp002: Hotspare pool is setup
d2: Concat/Stripe is setup
d3: Concat/Stripe is setup
d6: Concat/Stripe is setup
d7: Concat/Stripe is setup
d11: Concat/Stripe is setup
d12: Concat/Stripe is setup
d1: Mirror is setup
d10: Mirror is setup
======================
Modifying /etc/vfstab
======================
Dump content: kernel pages
Dump device: /dev/md/dsk/d5 (dedicated)
Savecore directory: /var/crash/sc3sconf1-n0
Savecore enabled: yes
installing cluster software on the cluster nodes...
Found the sc3sconf1-n1 to be the first cluster node
** Installing SunCluster 3.0 **
SUNWscr.....done
SUNWscdev...done
SUNWscu.....done
SUNWscman...done
SUNWscsal...Feb 27 12:03:23 sc3sconf1-n1 sendmail[596]: unable to
qualify my own domain name (sc3sconf1-n1) -- using short name
done
SUNWscsam...done
SUNWscvm....done
SUNWmdm.....done
Initializing cluster name to "sc3sconf1" ... done
Initializing authentication options ... done
Initializing configuration for adapter "qfe0" ... done
Initializing configuration for adapter "qfe4" ... done
CODE EXAMPLE B-2
Solstice DiskSuite Configuration