Sun Microsystems 4500/3 - Manual (Page 57)

Chapter 2 The Cluster Platform 4500/3 System 45
5. Select a CD-ROM drive from the menu.
Once the Cluster Platform 4500/3 recovery utility has placed a copy of the Solaris
operating environment onto a suitable disk slice, the system reboots. You are
prompted to specify the CD-ROM drive. Completing this process takes
approximately 15 minutes.
6. Install the Solaris operating environment software.
You are prompted to remove CD0 and mount CD1 on the CD-ROM drive. After
CD1 is mounted, press the Return key. The Solaris operating environment files are
copied from CD1 onto the management server boot disk. This process takes
approximately 20 minutes.
Standard Cluster Environment Recovery Utility V. 1.0
Please identify the CD-ROM drive:
1 c0t2d0s0
Enter selection [?,??,q]: 1
Please select a disk for restore:
1 c1t0d0s0
2 c1t1d0s0
3 c0t2d0s0
Enter selection [?,??,q]: 1
Do you wish to format and erase c1t0d0s0? [y,n,?,q] y
CONFIRM: c1t0d0s0 WILL BE FORMATTED AND ERASED. CONTINUE?
[y,n,?,q] y
Formatting c1t0d0s0 for restore...
...
fmthard: New volume table of contents now in place.
Cylinder groups must have a multiple of 2 cylinders with the given
parameters
Rounded cgsize up to 230
/dev/rdsk/c1t0d0s0: 34129016 sectors in 7243 cylinders of 19
tracks, 248 sectors 16664.6MB in 330 cyl groups (22 c/g, 50.62MB/
g, 6208 i/g)
Preparing to recover Management Server.
Please place Recovery CD #1 in the CD-ROM drive. Press
when mounted.
Restoring files from CD 1....
Installing boot block on c1t0d0s0.
Root environment restore complete.