Sun Microsystems 4500/3 - Manual (Page 47)

Chapter 2 The Cluster Platform 4500/3 System 35
Note – Use TABLE 2-1 on page 8 as a reference to input data for Step 29 through
Step 36. The variables shown in Step 29 through Step 32 are sample node names and
parameters.
29. Add the router name and IP address:
30. Add the cluster environment name:
31. Enter the terminal concentrator name (node names will follow):
32. Add the cluster node names and IP addresses:
Your network administrator can provide the remaining parameters for your
environment.
33. Add the disk array host names and IP addresses.:
Enter the Management Server’s Default Router (Gateway) IP
Address... 192.145.23.248
Enter the Cluster Environment Name (node names will follow)...
sc3sconf1
Enter the Terminal Concentrator Name... sc3conf1-tc
Enter the Terminal Concentrator’s IP Address... 192.145.23.90
Enter the First Cluster Node’s Name... sc3sconf1-n1
Enter the First Cluster Node’s IP Address... 192.145.23.91
Enter the First Cluster Node’s Ethernet Address... 9:8:50:bf:c5:91
Enter the Second Cluster Node’s Name... sc3sconf1-n2
Enter the Second Cluster Node’s IP Address... 192.145.23.92
Enter the Second Cluster Node’s Ethernet Address... 8:9:10:cd:ef:b3
Enter the First T3’s Name... t3-data
Enter the First T3’s IP Address... 192.145.23.93
Enter the First T3’s Ethernet Address... 00:12:e2:00:4c:4b
Enter the Second T3’s Name... t3-mirror
Enter the Second T3’s IP Address... 192.145.23.94
Enter the Second T3’s Ethernet Address... 00:10:f2:00:3e:4f