Sun Microsystems 4500/3 - Manual (Page 58)

46 Cluster Platform 4500/3 User’s Guide • July 2001
7. Install the second data CD.
When all files are copied from the first data CD, you are prompted to remove CD 1
and mount CD 2 on the CD-ROM drive. After CD 2 is mounted, press the Return
key. The software and patch files are copied from CD 2 onto the management server
boot disk. When all files are copied from both CDs, the system automatically shuts
down. You must reboot the system. This process takes approximately 20 minutes.
Completing the Recovery Process
Once the management server recovery software is loaded, you must configure the
system to match your environment. Refer to “Customizing the Cluster Platform
4500/3” on page 18 to customize your cluster environment. If the recovery process
involves the replacement of cluster nodes, refer to “Ethernet IP Address Worksheet”
on page 8 to verify that the first cluster node’s FC-AL is properly set up.
Please place Recovery CD #2 in the CD-ROM drive. Press
when mounted.
Restoring files from CD 2....
Management Server restore complete; now shutting down system.
INIT: New run level: 0
The system is coming down. Please wait.
System services are now being stopped.
umount: /dev busy
The system is down.
syncing file systems... done
Program terminated