Sun Microsystems 4500/3 - Manual (Page 27)

Chapter 2 The Cluster Platform 4500/3 System 15
Power and Heating Requirements
The Cluster Platform 4500/3 hardware should have two dedicated AC breaker
panels. The cabinet should not share these breaker panels with other, unrelated
equipment. The system requires two L30-R receptacles for the cabinet, split between
two isolated circuits. For international installations, the system requires two Blue
32AIEC309 (international) receptacles.
If the cabinet is installed on a raised floor, cool conditioned air should be directed to
the bottom of each rack through perforated panels.
The 72-inch cabinet in the Cluster Platform 4500/3 consumes power and dissipates
heat, as shown in
TABLE 2-3 .
TABLE 2-2 Cluster Platform Rack Components
Component Quantity
Sun StorEdge expansion cabinet 1
Ethernet hub 1
Netra T1 AC200 management server 1
Netra st D130 boot disks 4
Air baffle 2
Sun Enterprise cluster node 2
Sun StorEdge T3 array 2
Terminal concentrator 1
TABLE 2-3 Power and Heat Requirements for Cluster Platforms
72-Inch Cabinet Maximum Power Draw Heat Dissipation
1 10480 W 33786 BTUs/hr.