Sun Microsystems 4500/3 User Manual
Page 48
36
Cluster Platform 4500/3 User’s Guide • July 2001
34. When prompted to confirm the variables, type
y
if all of the variables are correct.
Type
n
if any of the variables are not correct, and re-enter the correct variables.
Enter 99 to quit the update mode, once all variables are displayed correctly.
Option Variable Setting
------ -------------------------------------------
1) Management Server’s Default Router= 192.212.87.248
2) Cluster Name= sc3sconf1
3) Terminal Server’s Name= sc3sconf1-tc
4) Terminal Server’s IP Address= 192.145.23.90
5) First Node’s Name= sc3sconf1-n1
6) First Node’s IP Address= 192.145.23.91
7) First Node’s Ethernet Address= 9:8:50:bf:c5:91
8) Second Node’s Name= sc3sconf1-n2
9) Second Node’s IP Address= 192.145.23.92
10) Second Node’s Ethernet Address= 8:9:10:cd:ef:b3
11) First T3’s Name... t3-data
12) First T3’s IP Address... 192.145.23.93
13) First T3’s Ethernet Address... 00:12:e2:00:4c:4b
13) Second T3’s Name... t3-mirror
13) Second T3’s IP Address... 192.145.23.94
13) Second T3’s Ethernet Address... 00:10:f2:00:3e:4f
99) quit update mode....
Are all variables correctly set y/n? y