Sun Microsystems 4500/3 - Manual (Page 41)

Chapter 2 The Cluster Platform 4500/3 System 29
20. Deselect IPv6 support.
Currently, only version 4 of the IP software is supported. Verify that IPv6 support is
disabled.
21. Confirm the customization information for the management server:
On this screen you should specify whether or not IPv6, the next
generation Internet Protocol, will be enabled on this machine.
Enabling IPv6 will have no effect if this machine is not on a
network that provides IPv6 service. IPv4 service will not be
affected if IPv6 is enabled.
> To make a selection, use the arrow keys to highlight the option
and press Return to mark it [X].
Enable IPv6
-----------
[ ] Yes
[X] No
2
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Networked: Yes
Use DHCP: No
Primary network interface: eri0
Host name: sc3sconf1-ms
IP address: 192.212.87.38
Enable IPv6: No
2