Samsung SCX-6320F - Manual (Page 61)

P APER H ANDLING
3.8
4 Adjust the paper guide to the width of the stack of print
material.
Make sure that you have not loaded too much print media.
The stack should be under the Max. fill line. The print media
buckles if you load a stack that is too deep or if you push it
in too far.
N OTES : When printing on previously
used paper via the Bypass Tray, the
printed side should be facing up with
the uncurled edge
at the left side. If you experience
problems with paper feed, turn the
paper around.
Max. fill line