Samsung SCX-6320F - Manual (Page 290)

A DDITIONAL F EATURES
6.8
If the document is within the margin, and the RX Reduction
feature is turned ON, it will be reduced to fit into the appropriate
size paper (Discard does not occur). If the Auto Reduction
feature is turned OFF or fails, the data within the margin will be
discarded. Settings range from 0 to 30 mm.
Prefix Dial : You can set the prefix dial number up to 5 digits.
This dial number is dialed first before any autodial number is
started. It is useful to access PABX exchange.
Receive Start Code : Receive Start Code allows you to initiate
fax reception from an extension phone plugged into EXT. jack
on the back of the machine. If you pick up the extension phone
and hear fax tones, enter the Receive Start Code. The Receive
Start Code is preset to *9* at the factory. Settings range from
0 to 9.
ECM Mode : Error Correction Mode compensates for poor line
quality. The options are “On” or “Off”. If the line quality is poor,
the transmission time may be increased when the ECM is
enabled.
To display or change default system setup options:
1 Press Menu until “Fax Setup” displays on the top line.
2 Press the scroll buttons until the desired option displays and
press Enter.
3 Press the scroll buttons to select the desired status or use
the number keypad to enter the desired value for the option
you have selected.
4
Press Enter to save the selection.
5 If necessary, repeat Steps from 3 to 5.
6 To return to idle mode, press Stop/Clear.