Sun Microsystems 220R - Manual (Page 94)

4 Section 7.6 “How to Use OpenBoot Diagnostics (OBDiag)” on page 195
3.3 How to Remove a PCI Card
3.3.1 Before You Begin
Complete these tasks:
4 Section 2.1 “How to Power Off the System” on page 54
4 Section 2.4 “How to Position the System for Service” on page 60
4 Section 2.6 “How to Remove the System Cover” on page 65
4 Section 2.8 “How to Avoid Electrostatic Discharge” on page 69
3.3.2 What to Do
1. Disconnect any external cable(s) attached to the faceplate of the PCI card.
2. Disconnect any cables connected to the PCI internal connectors.
3. Using a Phillips #2 screwdriver, remove the screw that secures the card to the
system back panel.
Caution - Do not apply excessive force to one end or one side of the board. Doing
so could damage the card.
94 Sun Enterprise 220R Server Service Manual
♦
January 2000, Revision A