Sun Microsystems 220R - Manual (Page 67)

2.6.3 What Next
You are now ready to install, remove, or replace components inside the
system chassis.
To reassemble the system, see:
4 Section 2.7 “How to Replace the System Cover” on page 67
2.7 How to Replace the System Cover
2.7.1 Before You Begin
Caution - Do not operate the system while the system cover is removed.
2.7.2 What to Do
1. Insert the system cover into the recessed hinge cutouts on the back panel.
Grasp the system cover by its sides, and lower the panel downwards and
toward the front of the enclosure.
The system cover hinges on two recessed cutouts on the back panel of the
enclosure.
Preparing to Service the System 67