Sun Microsystems 220R - Manual (Page 82)

Caution - When completing a two-person procedure, always communicate your
intentions clearly before, during, and after each step to minimize confusion.
2.15.2 What to Do
1. Extend the cabinet’s anti-tip legs.
Caution - Unless the rack is bolted to the floor, you must extend the cabinet’s
anti-tip legs and adjust the stabilizing feet to the floor.
2. Push the runner on each slide assembly as far back as possible into the slide
assembly.
a. Push in the inner rail on each slide assembly until it reaches the stops that
are located furthest away from the front of the rack.
b. Push in the runner until it stops in the slide assembly.
82 Sun Enterprise 220R Server Service Manual
♦
January 2000, Revision A