Removing and installing storage devices, 1 how to remove a disk drive, 1 before you begin – Sun Microsystems 220R User Manual
Page 127
CHAPTER
4
Removing and Installing Storage
Devices
This chapter describes how to remove and install the system’s storage and removable
media devices. For a list of part numbers for field-replaceable units and optional
equipment, see Appendix D.
The following tasks are covered in this chapter:
4
Section 4.1 “How to Remove a Disk Drive” on page 127
4
Section 4.2 “How to Install a Disk Drive” on page 130
4
Section 4.3 “How to Remove the Removable Media Assembly (RMA)” on page 132
4
Section 4.4 “How to Replace the Removable Media Assembly (RMA)” on page 135
4
Section 4.5 “How to Remove a CD-ROM or Tape Drive ” on page 138
4
Section 4.6 “How to Install a CD-ROM or Tape Drive” on page 139
4.1
How to Remove a Disk Drive
The system’s disk “hot-plug” feature lets you remove a disk drive without shutting
down the operating system or turning off the system power. For more
information, see your Sun Enterprise 220R Server Owner’s Guide.
4.1.1
Before You Begin
Complete this task:
4
Section 2.8 “How to Avoid Electrostatic Discharge” on page 69
127