Sun Microsystems 220R - Manual (Page 205)

(Continuation)
BAUDRATE=’4800’
BAUDRATE=’9600’
BAUDRATE=’19200’
BAUDRATE=’38400’
BAUDRATE=’57600’
BAUDRATE=’76800’
BAUDRATE=’115200’
BAUDRATE=’153600’
BAUDRATE=’230400’
BAUDRATE=’307200’
BAUDRATE=’460800’
TEST=’nvram_test’
SUBTEST=’write/read_patterns’
SUBTEST=’write/read_inverted_patterns’
TEST=’audio_test’
SUBTEST=’cs4231_test’
Codec_ID=’8a’
Version_ID=’a0’
SUBTEST=’external_lpbk’
External Audio Test not run: Please set the mfg-mode to sys-ext.
###OBDIAG_MFG_START###
TEST=’audio_test’
STATUS=’FAILED’
SUBTEST=’external_lpbk’
ERRORS=’1 ‘
TTF=’468 ‘
SPEED=’450.04 MHz’
PASSES=’1 ‘
MESSAGE=’Error: internal_loopback TBD’
TEST=’selftest’
Enter (0-12 tests, 13 -Quit, 14 -Menu) ===>
7.7 How to Set the Diagnostic Level for
POST and OBDiag
7.7.1 Before You Begin
Three different levels of diagnostic testing are available for power-on self-test (POST)
and OpenBoot Diagnostics (OBDiag): max (maximum level), min (minimum level),
Diagnostics and Troubleshooting 205