Sun Microsystems 220R - Manual (Page 219)

(Continuation)
nvramrc: data not available.
security-mode=none
security-password: data not available.
security-#badlogins=0
oem-logo: data not available.
oem-logo?=false
oem-banner: data not available.
oem-banner?=false
hardware-revision: data not available.
last-hardware-update: data not available.
diag-switch?=true
Caution - If the NVRAM is a new part, you must reset the values of the following
OpenBoot PROM configuration variables: banner-name= Sun Enterprise
220R, enclosure-type= , 540-4284and energystar-enabled?= false .
To set the values for the OpenBoot PROM configuration variables shown in the
following example, boot the operating system, log on as root, and enter the following
commands.
%
% eeprom banner-name=’’Sun Enterprise 220R’’
% eeprom enclosure-type=’’540-4284’’
% eeprom energystar-enabled?=false
Verify the variable settings by running the eeprom command without any
parameters, as shown in the following example.
Diagnostics and Troubleshooting 219