Sun Microsystems 220R - Manual (Page 61)

Use a Phillips #2 screwdriver to loosen the captive screws, which are in recessed
access holes in the decorative panels affixed to the system’s front panel.
5. Slide the system chassis evenly out of the rack enclosure until the inner glides
stop in the slide.
Grasp the system’s front bezel and pull the system smoothly out of the enclosure.
Continue pulling the system until the back of the chassis clears the enclosure and
you hear the flat spring catches in the glides engage with an audible clicking
sound. The system is then fully extended and secure.
Preparing to Service the System 61