Sun Microsystems 220R - Manual (Page 171)

6.6 How to Replace the DC-to-DC
Converter
6.6.1 Before You Begin
Complete this task:
4 Section 2.8 “How to Avoid Electrostatic Discharge” on page 69
Note - The DC-to-DC converter on this system is an assembly consisting of two
parts, part numbers 375-0094 and 300-1455. Be sure you have both parts when your
are replacing the DC-to-DC converter.
6.6.2 What to Do
1. Insert the replacement VRM DC-to-DC card into the replacement DC-to-DC
converter board.
Removing and Replacing Miscellaneous Assemblies 171